Features & Benefits
The Cisco® WAP200E Wireless-G Exterior Access Point lets you connect Wireless-G (802.11g) or Wireless-B
(802.11b) devices to your wired network, so you can add PCs to
the network without the need for additional cabling.
This weather-resistant access point creates a "wireless
bubble" in exterior spaces, such as patios and outdoor cafés.
Power over Ethernet (PoE) support makes it easy to install, and
you can create multiple basic service set identifiers (BSSIDs)
that connect to individual VLANs to keep your traffic separated.
The Cisco WAP200E is also ideal for use as a bridge to
connect remote areas. For example, it could be used to connect
offices with a warehouse housed in a separate building, or to
connect the buildings of a college campus. Installing one access
point on each building provides connections at up to Wireless-G
speeds - with no cable to run. The weather-resistant housing
protects the access point and is lightning protected.
To protect your data and privacy, the Cisco WAP200E supports
both Wired Equivalent Privacy (WEP) and the industrial-strength
wireless security of Wi-Fi Protected Access (WPA), encoding all
of your wireless transmissions with powerful encryption. The MAC
address filter lets you decide who can access your wireless
network, and advanced logging keeps you apprised of access
attempts. Configuration is a snap with the web browser-based
configuration utility.
RangeBooster technology, a compatible add-on to standard
Wireless-G, can nearly double the range of your wireless network
and increase its throughput by up to 35 percent. Unlike ordinary
wireless technologies that are confused by signal reflections,
RangeBooster uses two smart receivers at each end to detect and
decode reflected signals at distances where standard
technologies give up. You'll find that "dead spots" in the
wireless coverage area are reduced as well.
The integrated quality of service (QoS) features provide
consistent voice and video quality on both the wired and
wireless networks, enabling the deployment of business-quality
voice over IP (VoIP) and video applications. Additional features
such as multiple BSSIDs, wireless roaming, and auto-channel
selection make the Cisco WAP200E ideal for your business.
Features include:
- Lightning-protected, weather-resistant housing
- 10BASE-T/100BASE-TX Ethernet port, auto-sensing
half/full duplex, and automatic medium dependent interface
(MDI) and MDI crossover (MDI-X)
- Built-in 6-dBi directional antenna with 1x2
multiple-input, multiple-output (MIMO) to increase coverage
- Obtains power via 802.3af PoE from a PoE switch or power
injector
- Simplified web interface for installation and
configuration
- 802.1X RADIUS authentication
- Supports WEP, WPA Pre-Shared Key (WPA-PSK), WPA2-PSK,
WPA Enterprise, and WPA2 Enterprise wireless security
- Supports four BSSIDs and 802.1Q VLAN to service set
identifier (SSID) mapping
- Supports Simple Network Management Protocol (SNMP) and
uses an intuitive web-based interface
- Supports Wi-Fi Multimedia (WMM) wireless QoS
- Supports wireless roaming based on 802.11F (Inter-Access
Point Protocol [IAPP])
- Offers access point, bridge mode, and repeater mode
- Supports wireless security monitoring (working together
with Cisco WMP200, WPC200, and WUSB200 adapter cards)
- Supports wireless client isolation
Warranty Information
Terms:
System Requirements:
- 802.11b, 802.11g wireless adapter with TCP/IP
protocol installed per PC
- Switch/router with PoE support or PoE injector when used
with PoE
- Web-based configuration: Java-enabled web browser
Package Contents
- Cisco WAP200E Wireless-G Exterior Access Point
- User guide on CD-ROM
- Mounting plate with hardware
- 12-foot weather-resistant network cable
- Registration card
RHO Wireless Price is $479.95
Buy Now!
|