Features & Benefits
The Cisco® WAP2000 Wireless-G Access Point is ideal
for small businesses that want to expand their existing wired
networks or create new wireless networks for their workforce or
guests.
It features RangeBooster technology that is comparable to
standard 802.11g but with nearly twice the range and with
throughput that is up to 35 percent faster. Unlike ordinary
wireless technologies that are hampered by wireless signals that
reflect off walls, ceilings, and other objects, RangeBooster
uses these multiple signals with two smart receivers at each end
(router or access point and client adapter) to boost range and
throughput speeds. As a result, a RangeBooster solution reduces
or eliminates wireless signal dead spots in offices and other
buildings so users can connect to the network in more areas. The
Cisco WAP2000 comes with two 3-dBi for increased power, also
helping to extend the range of the access point.
Advanced security features such as Wi-Fi Protected Access™
(WPA2) make this solution ideal for your business. Integrated
quality of service (QoS) features provide consistent voice and
video quality on both the wired and wireless networks, enabling
your workforce to communicate or view video content without
disruptions and delay.
The Cisco WAP2000 can be powered from the included AC adapter
or from a Power over Ethernet (PoE) switch via Ethernet cabling,
enabling it to be mounted in ceilings or high on walls where
power outlets may not be available.
Additional features like multiple basic service set
identifiers (BSSIDs), wireless roaming, and auto-channel
selection give your business added flexibility to keep employees
and guests connected. The Cisco WAP2000 also features dual
firmware images, so it remains functional if a firmware upgrade
process is disrupted.
Features include:
- 10BASE-T/100 BASE-TX Ethernet port, auto-sensing
half/full duplex, and automatic medium dependent interface
(MDI) and MDI crossover (MDI-X) detection
- Full backward compatibility with 802.11b
- Easy installation and configuration via a web Interface
- Dual images for resilient firmware upgrades
- Supports Wired Equivalent Privacy (WEP), WPA Pre-Shared
Key (WPA-PSK), WPA2-PSK, WPA-ENT, and WPA2-ENT
authentication (802.11i ready)
- SMA detachable dipole antennae with 1x2 multiple-input,
multiple-output (MIMO) to increase coverage
- Supports PoE or external DC power
- Supports 4 BSSIDs and 802.1Q VLAN to service set
identifier (SSID) mapping
- Supports Simple Network Management Protocol (SNMP) and
uses an intuitive web-based interface
- Wi-Fi Multimedia (WMM) wireless QoS support, upgradable
to 802.11e
- Supports wireless roaming based on 802.11F (Inter-Access
Point Protocol [IAPP])
- Supports access point mode, bridge mode, and repeater
mode
- Supports wireless client isolation
- Metal casing
Warranty Information
Terms:
System Requirements:
- 802.11b, 802.11g wireless adapter with TCP/IP
protocol installed per PC
- Switch/router with PoE support or PoE injector when used
with PoE
- Web-based configuration: Java-enabled web browser
Package Contents
- Cisco WAP2000 Wireless-G Access Point with PoE
- 2 SMA detachable dipole antennas (3 dBi)
- User guide on CD-ROM
- Quick installation guide
- Ethernet network cable
- Power adapter
- Registration card
|