Features & Benefits

RangeBooster technology is a compatible add-on to standard Wireless-G that can nearly double your wireless network's range and increase its throughput by up to 35 percent.

Unlike ordinary wireless technologies that are confused by signal reflections, RangeBooster uses two smart receivers at each end to detect and decode reflected signals at distances where standard technologies give up. You'll find that "dead spots" in the wireless coverage area are reduced, too.

The advanced security features make this solution ideal for your business. Advanced wireless security using Wi-Fi Protected Access (WPA2) with up to 256-bit encryption, and Wireless Security Monitoring give your business the visibility and protection it needs. Used when Cisco® WUSB 200, WMP200 or WPC200 Wireless adapters are present, Wireless Security Monitoring alerts you of possible wireless intruders and vulnerabilities in the wireless deployment and gives you visibility into denial-of-service attacks.

The Cisco WAP200 Wireless-G Access Point lets you connect Wireless-G (802.11g) or Wireless-B (802.11b) devices to your wired network so you can add PCs to the network with no cabling hassle. Power over Ethernet (PoE) support makes it easy to install - you can mount the access point anywhere, even without ready access to a power plug. With appropriate PoE support at the other end, you need to run only one cable to the access point to deliver both data and power. Of course, you can also use the included AC adapter if power is available nearby.

The integrated quality of service (QoS) features provide consistent voice and video quality on both the wired and wireless networks, enabling the deployment of business-quality voice over IP (VoIP) and video applications.

Additional features like multiple basic service set identifiers (BSSIDs), wireless roaming, and auto-channel selection, make this solution ideal for your business. Features include:

• 10BASE-T/100BASE-TX Ethernet port, autosensing half/full duplex and medium dependent interface (MDI) and MDI crossover (MDI-X)
• Full backward compatibility with 802.11b
• Easy installation and configuration
• Supports Wired Equivalent Privacy (WEP), WPA Pre-Shared Key (WPA-PSK), WPA2-PSK, WPA-ENT, and WPA2-ENT authentication (802.11i ready)
• SMA detachable dipole antennae with 1x2 multiple-input, multiple-output (MIMO) to increase coverage
• Supports PoE or external DC power
• Supports 4 BSSID and 802.1Q VLAN to service set identifier (SSID) mapping
• Supports Simple Network Management Protocol (SNMP) and features an intuitive web-based interface
• Wi-Fi Multimedia (WMM) wireless QoS support, upgradable to 802.11e
• Supports wireless roaming based on 802.11F (Inter-Access Point Protocol [IAPP])
• Supports access point, bridge mode, and repeater mode
• Supports wireless security monitoring (working together with Cisco WUSB 200, WMP200 or WPC200 client cards)
• Supports wireless client isolation

Warranty Information

Terms:

• 3-year limited hardware warranty with return to factory replacement and 90-day limited software warranty.

System Requirements:

• 802.11b, 802.11g wireless adapter with TCP/IP protocol installed per PC
• Switch/router with PoE support or PoE injector when used with PoE
• Web-based configuration: Java-enabled web browser

Package Contents

• Cisco WAP200 Wireless-G Access Point
• 2 SMA detachable dipole antennas
• User guide on CD-ROM
• Ethernet network cable
• Power adapter
• Product stands
• Registration card